18 SOUND 10MB600

High Power 10-in Midbass Driver 8 Ohms
SKU: 10MB600
Availability: 1 in stock
Manufacturer: 18 SOUND

The 10MB600 mid-bass transducer represents a development of the 10M600 midrange, combining excellent linearity w/high efficiency & high power handling capabilities.
The 10MB600 is primarily intended for use as a midbass driver in extremely compact 2-way reflex enclosures between 10 & 40 lt.
Its curvilinear paper cone is formed using a special high strength wood pulp, designed to achieve the best possible rigidity & stiffness.
An exclusive treatment is also applied to the cone to increase its water repellent properties.
The 75 mm state-of-the-art voice coil is similar to those fitted to our top-of-the-range 18-in & 15-in models but it is wound w/aluminum wire.
The coil also employs our Interleaved Sandwich Voice coil (ISV) technology.
A high strength Fiberglas former carries windings on both the outer & inner surfaces to achieve a mass balanced coil, resulting in an extremely linear motor assembly w/a reduced tendency for eccentric behavior when driven hard.
The voice coil cooling is achieved using airways between the chassis back plate & the face plate of the magnet which allow heated air from the voice coil & gap to be channeled away & dissipated by the chassis basket.
This technology is a result of 3D CAD resource application by our engineers.
The top & back plates of the magnet assembly have been designed to optimise flux density & BL factor in the air gap also using our in-house FEA CAD facility.
In addition, a special treatment is applied to the top & back plates making the transducer far more resistant to the corrosive effects of salts & oxidization.
Hence, the equipment is able to perform outdoors in inclement weather conditions.
* Nominal Diameter: 260 mm (10 in)
* Rated Impedance: 8 Ohm
* AES Power: 450 W
* Program Power: 700 W
* Peak Power: 1500 W
* Sensitivity: 98 dB
* Frequency Range: 55 to 4500 Hz
* Power Compression at -10dB: 0,4 dB
* Power Compression at -3dB: 1,6 dB
* Power Compression at Full Power: 2,2 dB
* Max Recomm.
Frequency: 2500 Hz
* Recomm.
Enclosure Volume: 10 to 40 lt.
(0,9 to 1,41 cuft)
* Max Recomm.
Frequency: 2500 Hz
* Max Peak To Peak Excursion: 24 mm (0,94 in)
* Voice Coil Diameter: 75 mm (3 in)
* Voice Coil Winding Material: aluminum
* Suspension: M-roll, polycotton
* Cone: Curvilinear, paper
* Thiele Small Parameters
* Fs: 58 Hz
* Re: 5,7 Ohm
* Sd: 0,035 sq.mt.
(54,25 sq.in.)
* Qms: 5,5
* Qes: 0,23
* Qts: 0,22
* Vas: 33,4 lt.
(1,18 cuft)
* Mms: 38 gr.
(0,08 lb)
* BL: 18,6 Tm
* Linear Mathematical Xmax: +/- 6,5 mm (+/- 0,26 in)
* Le (1kHz): 1,6 mH
* Ref.
Efficiency 1W at 1m (half space): 96,5 dB

* Overall diameter: 260 mm (10,24 in)
* N.
of mounting holes & bolt: 8
* Mounting holes diameter: 7,15 mm (0,28 in)
* Bolt circle diameter: 244,5 mm (9,63 in)
* Front mount baffle cutout Diameter: 232 mm (9,13 in)
* Rear mount baffle cutout Diameter: 232 mm (9,13 in)
* Total depth: 127 mm (5 in)
* Flange & gasket thickness: 14,5 mm (0,57 in)
* Flange & gasket thickness: 14,5 mm (0,57 in)
* Net weight: 7,35 kg (16,23 lb)
* Shipping weight: 7,9 kg (17,44 lb)
* CardBoard Packaging dimensions: 275 x 275 x 164 mm (10,83 x 10,83 x 6,46 in)