P-AUDIO 15BM1200CA

High Output 15 Inch Precision Transducer w/3-in Voice Coil - 8 Ohms
SKU: 15BM1200CA
Availability: 62 in stock
Manufacturer: P-AUDIO

* 3" Voice Coil
* 1200 Watts Peak Power Handling
* Ferrite Magnetics
* Precision Circular Wire Geometry
* Die Cast Aluminum Chassis
Applications
The P Audio 15BM-1200CANEW is a high output wide bandwidth transducer.
The 15BM-1200CA NEW is an upgraded design that features many of P Audio’s new technologies & performance upgrades.
The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low & mid band frequencies & is ideal for high level response in both live sound & recorded music venues.
The transducer has a rated bandwidth of 45Hz to 3500Hz.
The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.
The 15BM-1200CA NEW has been optimized for use in two way or three way sound reinforcement systems.
The 15BM-1200CA NEW employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling & a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available.
The 15BM-1200CA NEW utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling & reliability but to also increase power compression performance by carefully balancing & directing airflow to critical areas.
The voice coil design is a bobbin wound geometry w/P Audio's precision circular wire technology to insure high conversion efficiency.
The system suspension has been designed specifically for high linear displacement & extended low frequency response.
The 15BM-1200CA NEW also features a single spider configuration that provides system reliability & mechanical control.
The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
Nominal diameter...381 mm/15 in
Power rating...300 Watt(aes)
Nominal impedance....8 ohms
Sensitivity....97 dB
Frequency range...45-3500 Hz
Chassis type...Cast aluminum
Magnet type...Ferrite
Magnet weight...2.3 kg/81.4 oz
Voice coil diameter...76.2 mm/3.0 in
Coil material...CCA-W
Former material...Glass fiber
Cone material...Paper
Surround material....Cloth
Suspension....Single
X-max...3.4 mm/0.13 in
Gap depth...10.0 mm/0.39 in
Voice coil winding width..16.8 mm/0.66 in
Net Weight...8.0 kg/17.6 lb
Packing Dimension WxDxH.430 x 430 x 220 mm
Shipping Weight...9.0 kg/19.8 lb
Small Signal Parameters
Re.....5.7Q
Fs.....48 Hz
Mms....92.19 g/3.25 oz
Mmd....77.81 g/2.74 oz
Qms....5.39
Qes.....0.43
Qts....0.40
Vas....123.35 lt/4.36 ft?
Bl...19.19 Tm
Cms...1.2e-04 m/N
Rms...5.10 Ns/m
Le (at 1kHz)....0.44 mH
Sd...855 cm2