2,000 Watt 1 Channel Amplifier * Channels & Class: Monoblock D * MAX Power: 2,000 * RMS at 1 Ohms : 1 x 1,200 * RMS at 2 Ohms : 1 x 900 * RMS at 4 Ohms : 1 x 60
Availability: Out of stock
* All MOSFET Transistor Amplifier
* Regulated Pulse Width Modulation Circuitry
* 1 Ohm Stable Class D Monoblock
* Pre-Amp Outputs
* Three-Way Protection Circuitry
* Front Panel Connections & Controls
* Direct Input 4 ga.
Power & 8 ga.
* Top Panel Status Indicators
* Die Cast Aluminum Chassis
* Chassis Integrated Mounting Feet
* Jet Black Texture Coat Finish
* Channels & Class: Monoblock D
* MAX Power: 2,000
* RMS at 1 Ohms: 1-in x 1,200
* RMS at 2 Ohms: 1-in x 900
* RMS at 4 Ohms: 1-in x 600
* Input Sensitivity: 200mV-6V
* THD %: 0.20%
* Frequency Response: 20-200Hz
* Signal to Noise Ratio: 100dB
* Fusing: (2) 40
* Dimensions:(2.125-in H x 8.25-in x 11.375-in
* Low-Pass Crossover: 40-200Hz
* Subsonic Crossover: 20-50Hz
* Bass Boost (45Hz): 0-18dB
* Phase Control: 180 Degree
* Remote Gain Control: Included
* 12dB Crossovers
* Filter out the frequencies your subwoofers can't play & use the power for what they can play via 12dB/octave slope low pass, & subsonic crossovers.
* Remote Gain Control
* The remote gain control allows amplifier level adjustment from a remote location in the vehicle.
* Strap Amps Together
* Get double 1 ohm power on a 2 ohm load by strapping two like amps together.
All pre-amp adjustments & remote control are done from one Master amp.
* All MOSFET Amplifier
* BAMF amplifiers use MOSFET transistors for the power supply & output stages.
MOSFET transistors increase durability & longevity over bi-polar counterparts...
* 18db Bass Boost
* Utilize a built in 45Hz bass boost for up to 18dB of gain.
Get the most power from your BAMF amplifier.
* 180 Degree Phase Switch
* Phase align the subwoofer sound waves w/the front speakers so both hit your ear simultaneously.
Phase aligning the normally out-of-phase subwoofer sound waves increases the bass your ears pick up.