P-AUDIO C122000CA

High Output 12 Inch Precision Transducer w/3.25-in Voice Coil - 8 ohms
SKU: C122000CA
Availability: 75 in stock
Manufacturer: P-AUDIO

* 3.25" Voice Coil
* 2000 Watts Peak Power Handling
* Ferrite Magnetics
* Precision Circular Wire Geometry
* Die Cast Aluminum Chassis
Applications
The P Audio C12-2000CAis a high performance wide bandwidth transducer.
The C12-2000CA is an upgraded design that features many of P Audio’s new technologies & performance upgrades.
The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band & upper mid frequencies & is ideal for high level response in both live sound & recorded music venues.
The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.
The C12-2000CA has been optimized for use in two way or three way sound reinforcement systems.
The transducer is also ideal as a low frequency driver for ultra high performance system designs & has an operating bandwidth of 50Hz to 3000Hz.
The C12-2000CA features a very large 3.25 inch (82.5mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling & a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available.
The C12-2000CA utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling & reliability but to also increase power compression performance by carefully balancing & directing airflow to critical areas.
The voice coil design is a bobbin wound geometry w/P Audio’s inside/ outside precision wire technology to improve conversion efficiency & provide a large cross-sectional area for superior cooling.
The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
Nominal diameter...305 mm/12 in
Power rating...500 Watts(aes)
Nominal impedance...8 ohms
Sensitivity....97 dB
Frequency range...50-3000 Hz
Chassis type...Cast aluminum
Magnet type...Ferrite
Magnet weight...2.9 kg/103.9 oz
Voice coil diameter...82.5 mm/3.25 in
Coil material...CCA-W
Former material...Glass fiber
Cone material...Paper
Surround material....Cloth
Suspension...Single
X-max...4.8 mm/0.19 in
Gap depth....10 mm/0.39 in
Voice coil winding width..19.6 mm/0.77 in
Net Weight....9.4 kg/20.7 lb
Packing Dimension WxDxH.355 x 355 x 205 mm
Shipping Weight..10.2 kg/22.5 lb
Small Signal Parameters
Re.....5.5 Q
Fs....58 Hz
Mms....53.09 g/1.87 oz
Mmd....46.05 g/1.62 oz
Qms.....6.65
Qes....0.37
Qts.....0.35
Vas...56.03 lt/1.98 ft?
Bl...17.03 Tm
Cms...1.4e-04 m/N
Rms...2.93 Ns/m
Le (at 1kHz)....0.49 mH