MARANI DGP230A

Professional Digital Parametric/Graphic 30-Band Stereo Equalizer w/XLR Balanced inputs and outputs
SKU: DGP230A
Availability: 7 in stock

* Performs a High Precision set of 30 parametric or shelving filters on each channel.
* Provides also a High Pass/Low Pass filter for up to 24dB/Octive, Delay & RMS Limiter on each channel for improving the sound definition possibilites.
* Has 20 memory settings available, with four factory presets & sixteen user memory presets.
* Performs the following basic processes: 2x30 Band Parametric Bell or Shelving filters, each filter can be singularly selected as Bell or Shelving.
* Independent Channel Gain, Phase Control, Delay & Mute for each Output channel.
* Excellent sonic performance with 24bit high end converters coupled with a 48kHz sample rate
* Extremely low noise and distortion
* Digital Input
* Top-grade DSP Engine 30 band parametric equalization per channel
* Each band can be switched to Bell, Low/High Shelving, as first and second order
* Crossover filters with slopes from 6dB/Octave up to 24dB/ Octave including Butterworth, Bessel, Linkwitz-Riley
* Each channel features a precision dynamic range controller composed of a Limiter working on RMS value of the limiter’s input
* Adjustable Delay time up to 850 ms for every input and output channel
* Phase correction per output channel
* Direct PC/Network Connection Rear panel USB connector for direct PC communications
* RS485 connection for system setup, monitoring and control via fully manageable remote PC software
* Control Front panel interactive LCD display for local access and configuration
* Front panel 7-LED level meter indicators per channel and Compressor/Limiter
* Analog Input 2 x XLR electronically balanced
* Analog Output 2 x XLR electronically balanced
* Maximum Input Level +20 dBu
* Maximum Output Level Low +20 dBu
* Digital Input 1 SPDIF; Gain 0dBu
* Minimum Load 150 ohm
* THD+N 0.001% at 1kHz 0dBu
* Signal to noise ratio greater than: 108dBA
* Frequency Response 20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz
* AD & DA Converters 1x AK5388 24bit, 1x AK4396 24bitDSP & Processing
* DSP Engine Dream SAM3716, 24bit (data) x 96 bit (coeff.)
* DSP Resolution 24×32 bit for filtering process
* 96 bits resolution on intermediate computation results
* Parametric Equalization 30 filters per channel selected as Bell or Shelving
* Filter Type Bell, 1st /2nd Order Shelvings with -3dB at cutting Frequency
* Filter Gain From -15dBu up to +15dBu by 0.5dBu resolution steps
* Center Frequency Selectable with a 1/24th of octave resolution step from 20Hz up to 20kHz
* Filter Q/BW Q from 0.5 up to 3 by 0.05 resolution steps
* Crossover Section HPF/LPF Butterworth 6/12/18/24dB per octave
* Bessel, Linkwitz-Riley 12/24dB per octave
* Filter resolution 1/24th of octave
* RMS Limiter Threshold from 20dBu up to -10dBu
* Attack time from 5ms up to 200ms (1ms resolution up to 20ms, 10ms resolution up to 100ms and 20ms resolution up to 200ms)
* Release time from 0.1 sec up to 3 sec (0.1sec resolution)
* Delay 848,998 ms 21us increment/decrement steps per channel General
* 32 User Presets
* Front Panel 2×24 character LCD display with green LED backlight
* 7-LED meter per input channel -20dBu to +15dBu, clip
* 7-LED meter per output channel -15dBu to +15dBu
* 7-LED meter per channel -Compressor-
* Blue LED (Edit) per channel
* Red LED (Mute) per channel
* NAV/PM1 Rotary encoder push button switch
* PM2, PM3, ENTER, ESC, UTILITY push button switches
* EDIT/MUTE/BYPASS push button per channel
* Rear Panel 2 x XLR female connector (Input)
* 2 x XLR male connector (Output)
* 1 x RCA connector (SPDIF input)
* 1 x XLR female connector for RS485 (Input)
* 1 x XLR male connector for RS485 (Output)
* USB type A connector
* 2 x Ground-lift toggle switch
* IEC C13 16A connector
* Power on/off switch
* Main AC 90-240VAC (50/60Hz) – 40W
* Dimensions 19-in x 1.75-in x 9-in (483 x 44 x 229mm) 1 Rack U Space
* Weight, Net / Shipping 7.71 lbs (3.5 Kg) / 8.82 lb (4 Kg)