DBX DRIVERACK260

Loudspeaker Management System w/Graphic & Parametric EQ & w/Feedback Elimination w/Six XLR Outputs
SKU: DRIVERACK260
Availability: Out of stock
//use fancybox to how nice pop-up Html.AddScriptParts("~/Scripts/jquery.fancybox-1.3.4.pack.js"); Html.AddCssFileParts("~/Content/fancybox/jquery.fancybox-1.3.4.css");

Feedback Elimination
2.7 Seconds of Alignment & Zone Delay
RS-232 PC GUI control
Classic dbx Compression & Limiting
Graphic & Parametric EQ
Auto-EQ Function
Full Bandpass, Crossover, & Routing Configurations
Auto Gain Control
Pink Noise Generator & fulltime RTA
Setup Wizard w/JBL speaker & Crown Power Amplifier Tunings
Security Lockout
Wall Panel Control Inputs
There is a reason that Tour Sound Professionals & discriminating Audio Contractors choose dbx DriveRack products for their high-end tours & installs.
The DriveRack products provide the tools that ensure that the system sounds its very best.
w/the introduction of the new 260, the heritage of unrivaled system/loudspeaker control continues.
The 260 capitalizes on the road tested & contractor approved nature of the other products in the DriveRack line.
The 260 provides full bandpass & crossover configurations as well as independent output processing & a full time RTA for live sound applications.
Contractors will appreciate its control inputs for wall-panel logic control & the patent-pending Advanced Feedback Suppression (AFS ).
The DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years.
The DriveRack 260 was designed w/the purpose & vision of providing state-of-the-art signal processing, while utilizing a simple & intuitive user interface.
This goal has been achieved by offering two independent channels of processing power w/a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator & the 120A Subharmonic Synthesizer on the input, w/a six channel output system that includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts) & alignment delay.
These features combined w/the Wizard setup system & complete DriveWare GUI control represent a methodical design that is guaranteed to deliver optimal, all-in clusive processing in a completely scalable system.
Input (2) line inputs.
(1) RTA Mic input
Input Connectors (2) Female XLR line inputs.
XLR RTA Mic input
Input Type Electronically balanced/RF filtered
Input Impedance >40k ohm
Max Input +30dBu w/input jumpers in +30 position
CMRR > 45dB
Mic Preamp Phantom Power +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN) < -110dB, 22Hz-22kHz, 150 ohm (RTA)
Output 6 total
Output Connectors Male XLR
Output Type Electronically balanced, RF filtered
Output Impedance 120ohm
Max Output +22dBu
A/D Converter dbx Type IV Conversion System
A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted
Type IV Dynamic Range >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
Sample Rate 48kHz
D/A Dynamic Range 112 dB A-weighted, 109dB unweighted
Dynamic Range >110 dB A-weighted, >107dB unweighted
THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response 20Hz - 20kHz, +/- 0.5dB
Interchannel Crosstalk >110dB, 120dB typical, (input-to-output: >100dB)