* 2.5" Voice Coil
* 1000 Watts Peak Power Handling
* Neodymium Magnetics
* Precision Circular Wire Geometry
* Stamped Steel Chassis
The P Audio E10-1000CAis a high output full range/mid bass transducer.
The E10-1000CA is an upgraded design that features many of P Audio’s new technologies & performance upgrades.
The 10 inch (254mm) diameter piston will produce extremely high sound pressure levels at very low frequencies & is ideal for high level deep bass & sub woofer response in both live sound & recorded music venues.
The operating bandwidth of the E10-1000CA is 70Hz to 3000Hz.
The transducer uses very high energy neodymium based magnetics to achieve a very high acoustic output to weight ratio.
The E10-1000CA employs a medium format 2.5 inch (63.7mm) diameter voice coil that provides an AES rated 250 watts of continuous power handling & a full 1000 watts of peak rated power handling when sufficient amplifier headroom is available.
The E10-1000CA utilizes P Audio's under damper venting technology to improve transducer air flow & reduce turbulence under the damper & around the voice coil.
The voice coil design is a bobbin wound geometry w/P Audio's precision round wire technology to maximize system conversion efficiency.
The suspension has been designed specifically for high linear displacement & extended low frequency response.
The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
Nominal diameter..254 mm/10 in
Power rating..250 W(aesj
Frequency range..70-3000 Hz
Chassis type..Heavy Duty Stamp Steel
Magnet weight..0.15 kg/5.5 oz
Voice coil diameter..£3.7 mm/2.5 in
X-max..3.6 mm/0.14 in
Gap depth..9 mm/0.35 in
Voice coil winding width..16.2 mm/0.64 in
Net Weight..2.3 kg/5.1 lb
Packing Dimension WxDxH.275 x 275 x 150 mm
Shipping Weight..2.8 kg/6.2 lb
Small Signal Parameters
Mms...36.0 g/1.27 oz
Mmd...32.32 g/1.14 oz
Vas...23.24 lt/0.82 W
Le (at 1kHz)..0.46 mH