EMINENCE EPS12C

A fast & dynamic, lightweight pedal guitar speaker that has been field tested in Nashville, Arizona, Texas, & L.A. It has a full low end, neutral mids, & is bright & clear.
SKU: EPS12C
Availability: Out of stock

This table charts the specifications for the EPS-12C speaker
* Nominal Basket Diameter: 12-in , 305 mm.
* Nominal Impedance: 4 Ohms.
* Power Rating:
* Watts: 225 W.
* Music Program: 450 W.
* Resonance: 49 Hz.
* Usable Frequency Range: 65 Hz - 4.9 kHz.
* Sensitivity: 100.1 dB.
* Magnet Weight: 11 oz..
* Gap Height: 0.36-in , 9.1 mm.
* Voice Coil Diameter: 3-in , 76 mm.
* Thiele & Small Parameters.
* Resonant Frequency (fs): 49 Hz.
* DC Resistance (Re): 3.55 Ohms.
* Coil Inductance (Le): 0.42m H.
* Mechanical Q (Qms): 10.2.
* Electromagnetic Q (Qes): 0.24.
* Total Q (Qts): 0.24.
* Compliance Equivalent Volume (Vas): 82.43 liters / 2.91 cu.ft..
* Peak Diaphragm Displacement Volume (Vd): 155.9 cc.
* Mechanical Compliance of Suspension (Cms): 0.22 mm/N.
* BL Product (BL): 14.69 T-M.
* Diaphragm Mass Inc.
Airload (MMs): 47 grams.
* Efficiency Bandwidth Product (EBP): 204.
* Maximum Linear Excursion (Xmax): 3 mm.
* Surface Area of Cone (Sd): 519.5 cm2.
* Maximum Mechanical Limit (Xlim): 9.1 mm.
-----------------------------------
Recommended Enclosure Volume;
* Sealed: Acceptable.
* Vented: Acceptable.
* Driver Volume Displaced: 0.054 cu.ft.
/ 1.53 liters.
* Overall Diameter: 12.38-in , 314.5 mm.
* Baffle Hole Diameter: 11.06-in , 280.9 mm.
* Front Sealing Gasket: Yes.
* Rear Sealing Gasket: Yes.
* Mounting Holes Diameter: 0.28-in , 7.1mm.
* Mounting Holes B.C.D.: 11.62-in , 295.2mm.
* Depth: 5.63-in , 143 mm.
* Net Weight: 7.1 lbs, 3.22 kg.
* Shipping Weight: 8.7 lbs, 3.95 kgs.
* Materials of Construction.
* Coil Construction: Edge wound Aluminum Voice Coil.
* Coil Former: Kapton former.
* Magnet Composition: Neodymium magnet.
* Core Details: Vented core.
-----------------------------------.
* Basket Materials: Die-cast aluminum basket/ heatsink.
* Cone Composition: Paper cone.
* Cone Edge Composition: Cloth cone edge.
* Dust Cap Composition: Treated paper dust cap.