Trapezoidal 2-way Powered Speaker System w/8-in Woofer w/1.75-in diaphragm compression driver
Availability: Out of stock
Manufacturer: QSC

* 105 Degrees Nominal coverage angle
* Maximum SPL 127 dB peak
* Onboard mixer w/two combo XLR & 1/4-in inputs, & stereo RCA inputs, (three audio input sources); two direct channel outputs & single summed balanced output
* Extensive DSP enhances system performance
* DMT (Directivity Matched Transition) provides for matched LF & HF coverage across the entire listening area, eliminating unnatural -indead-in or -inhot-in frequency zones.
Intrinsic Correction , first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR & FIR filters that actively adjust time, frequency & amplitude response to a maximally flat band pass target.
The result is a speaker that behaves equally well across the entire sound field.
DEEP & excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail protection protects both the amplifier module & your performance from unnatural & destructive clipping.
Attractive & professional appearance
* Rugged ABS enclosures
* 16-gauge powder coated steel grille
* Comfortable ergonomic handles
* 35 mm pole sockets w/Tilt-Direct
* M10 rigging points
* Eyebolt & yoke mount accessories available
* Frequency Response (-6 dB): 66 Hz to 18 kHz
* Frequency Range (-10 dB): 61 Hz to 20 kHz
* Nominal Coverage (-6 dB): 105 Degrees conical
* Maximum SPL1: 127 dB peak
* Power Output: 1000 W continuous Class D Amplifier (500 W LF, 500 W HF) 2000 W peak
* Input Impedance: XLR / 1/4-in: 40 K Ohms balanced / 20 K Ohms unbalanced XLR / 1/4-in MIC mode: 2260 balanced RCA: 10 K Ohms
* Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
* Indicators: Power, Signal A, Signal B, Standby, Limit, Mic
* Connectors: Balanced female XLR/1/4-in line/mic level input, Balanced female XLR/1/4-in line level input, Dual Balanced male XLR full range line level out , Balanced male XLR mix out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
* Cooling: On demand, 50 mm variable speed fan
* Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
* Transducer Protection: Thermal limiting, excursion limiting
* AC Power Input: Universal power supply 100 to 240 VAC, 50 to 60 Hz
* AC Power Consumption (1/8 of full power): 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A
* Material: Impact resistant ABS
* Finish: Black paint
* Grille: Rugged powder-coated steel
* Dimensions (HWD): 17.7-in x 11-in x 10.6-in 450 mm x 280 mm x 269 mm
* Weight (Net): 27 lb / 12.2 kg
* Available Accessories: K8 tote, K8 yoke, M10 Kit-C