P-AUDIO SN101200CA

High Output 10 Inch Precision Transducer w/2.0-in Voice Coil - 8 Ohms
SKU: SN101200CA
Availability: 38 in stock
Manufacturer: P-AUDIO

2.5" Voice Coil
* 1200 Watts Peak Power Handling
* Ferrite Magnetics
* Precision Rectangular Ribbon Wire Geometry
* Die Cast Aluminum Chassis
Applications
The P Audio SN10-1200CA is a high performance wide bandwidth transducer optimized for use in mid bass frequencies.
The SN10-1200CA is an upgraded design that features many of P Audio's new technologies & performance upgrades.
The 10 inch (254mm) diameter piston will produce extremely high sound pressure levels at both low & mid band frequencies & is ideal for high level response in both live sound & recorded music venues.
The transducer uses high energy ferrite based magnetics to achieve a very high acoustic output to weight ratio.
The SN10-1200CA has been optimized for use in two way or three way sound reinforcement systems & has an operating range of 50Hz to 5000Hz.
The SN10-1200CA features a large 2.5 inch (63.7mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling & a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available.
The SN10-1200CA utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling & reliability but to also increase power compression performance by carefully balancing & directing airflow to critical areas.
The voice coil design is a bobbin wound geometry w/P Audio’s edge wound rectangular wire technology to improve conversion efficiency & provide a large cross-sectional area for superior cooling.
The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
Nominal diameter...254 mm/10 in
Power rating....300 Watts (aes)
Nominal impedance....8 OHMS
Sensitivity.....96 dB
Frequency range....50-5000 Hz
Chassis type....Cast aluminum
Magnet type.....Ferrite
Magnet weight....2.0 kg/71.1 oz
Voice coil diameter...63.7 mm/2.5 in
Coil material.....CCA-R
Former material....Kapton
Cone material.....Paper
Surround material....Cloth
Suspension.....Single
X-max....2.5 mm/0.09 in
Gap depth....10 mm/0.39 in
Voice coil winding width...15 mm/0.59 in
Net Weight....6.5 kg/14.3 lb
Packing Dimension WxDxH..285 x 285 x 150 mm
Shipping Weight....7.3 kg/16.1 lb
Small Signal Parameters
Re......5.70
Fs......62 Hz
Mms.....37.08 g/1.31 oz
Mmd....29.67 g/1.05 oz
Qms......4.90
Qes......0.30
Qts......0.28
Vas.....29.99 lt/1.06 ft?
Bl.....16.73 Tm
Cms.....1.8e-04 m/N
Rms.....2.96 Ns/m
Le (at 1kHz)....0.39 mH
Sd.....346 cm