P-AUDIO SN6600CA

High Output 6.5 Inch Precision Transducer w/1.75-in Voice Coil - 8 Ohms
SKU: SN6600CA
Availability: 124 in stock
Manufacturer: P-AUDIO

* 1.75 Voice Coil
* 600 Watts Peak Power Handling
* Ferrite Magnetics
* Precision Circular Wire Geometry
* Die Cast Aluminum Chassis
Applications
The P Audio SN6-600CA is a high performance wide bandwidth transducer optimized for use in mid bass frequencies.
The SN6-600CA is an upgraded design that features many of P Audio’s new technologies & performance upgrades.
The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low & mid band frequencies & is ideal for high level response in both live sound & recorded music venues.
The transducer uses very high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.
The SN6-600CA has been optimized for use in two way or three way sound reinforcement systems & has an operating range of 80Hz to 3000Hz.
The SN6-600CA features a 1.75 inch (44.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling & a full 600 watts of peak rated power handling when sufficient amplifier headroom is available.
The SN6-600CA utilizes P Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling & reliability but to also increase power compression performance by carefully balancing & directing airflow to critical areas.
The voice coil design is a bobbin wound geometry w/P Audio’s precision round wire technology to maximize system conversion efficiency.
The cone suspension is a high internal damping rubber design.
The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
* Nominal diameter..165 mm/6.5 in
* Power rating..150 Watts(aes)
* Nominal impedance..8 OHMS
* Sensitivity...90 dB
* Frequency range..
80-3000 Hz
* Chassis type..Cast aluminum
* Magnet type...Ferrite
* Magnet weight..2.6 kg/92.1 oz
* Voice coil diameter..44.5 mm/1.75 in
* Coil material...SV-W
* Former material..Kapton
* Cone material...Paper
* Surround material..Rubber
* Suspension...Single
* X-max...3 mm/0.12 in
* Gap depth..6 mm/0.24 in
* Voice coil winding width..12 mm/0.47 in
* Net Weight..1.8 kg/4.0 lb
* Packing Dimension WxDxH.180 x 180 x 110 mm
* Shipping Weight..2.0 kg/4.4 lb
Small Signal Parameters
* Re...5.50
* Fs...71 Hz
* Mms...12.88 g/0.45 oz
* Mmd...11.91 g/0.42 oz
* Qms...5.17
* Qes...0.40
* Qts...0.37
* Vas...11.20 lt/0.40 ft
* Bl...8.94 Tm
* Cms...3.9e-04 m/N
* Rms...1.11 Ns/m
* Le (at 1kHz)..0.42 mH
* Sd...143 cm2