P-AUDIO SN8800CA

High Output 8 Inch Precision Transducer w/2-in Voice Coil - 8 Ohms
SKU: SN8800CA
Availability: Out of stock

* 2" Voice Coil
* 800 Watts Peak Power Handling
* Ferrite Magnetics
* Precision Rectangular Ribbon Wire Geometry
* Die Cast Aluminum Chassis
Applications
The P Audio SN8-800CA is a high performance wide bandwidth transducer optimized for use in mid bass frequencies.
The SN8-800CAis an upgraded design that features many of P Audio's new technologies & performance upgrades.
The 8 inch (203mm) diameter piston will produce extremely high sound pressure levels at both low & mid band frequencies & is ideal for high level response in both live sound & recorded music venues.
The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.
The SN8-800CA has been optimized for use in two way or three way sound reinforcement systems & has an operating range of 70Hz to 5000Hz.
The SN8-800CA features a 2 inch (51.3mm) diameter voice coil that provides an AES rated 200 watts of continuous power handling & a full 800 watts of peak rated power handling when sufficient amplifier headroom is available.
The SN8-800CA utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling & reliability but to also increase power compression performance by carefully balancing & directing airflow to critical areas.
The voice coil design is a bobbin wound geometry w/P Audio’s edge wound rectangular wire technology to improve conversion efficiency & provide a large cross-sectional area for superior cooling.
Nominal diameter..203 mm/8 in
Power rating..200 Watts (aes)
Nominal impedance..8 ohms
Sensitivity...95 dB
Frequency range..70-5000 Hz
Chassis type..Cast aluminum
Magnet type...Ferrite
Magnet weight..1.2 kg/41.1 oz
Voice coil diameter..51.3 mm/2.0 in
Coil material...CCA-R
Former material..Glass fiber
Cone material...Paper
Surround material..Rubber
Suspension...Single
X-max..2.5 mm/0.09 in
Gap depth..6 mm/0.24 in
Voice coil winding width..11 mm/0.43 in
Net Weight..3.0 kg/6.6 lb
Packing Dimension WxDxH.230 x 230 x 130 mm
Shipping Weight..3.2 kg/7.1 lb
Small Signal Parameters
Re...5.0Q
Fs...89 Hz
Mms...19.41 g/0.68 oz
Mmd...17.26 g/0.61 oz
Qms...5.35
Qes...0.50
Qts...0.46
Vas...13.44 lt/0.47 ft?
Bl...10.46 Tm
Cms...1.7e-04 m/N
Rms...2.03 Ns/m
Le (at 1kHz)..0.26 mH
Sd...241 cm2
The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.