Amplifier w/ Bluetooth Receiver works with 70 or 100 Volt Impedence Matching Step Down transformers like with some ceiling speakers
Availability: 198 in stock
Manufacturer: DENON

Denon Professional's Solution Series is designed to be the best friend of audio contractors.
It's specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient.
Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.

Compact Bluetooth audio receiver with a built-in 20W RMS, 4-ohm, 70/100V Class D amplifier.
It lets you add an amp with wireless stereo Bluetooth audio reception to any professional audio system.
Once you pair your Bluetooth device, you can send your device's audio signal to your loudspeakers, powered by the DN-200AZB.

* Bluetooth level control (WILL TAKE STEREO IN AND OUTPUT MONO)
* 4 ohm, 70/100V, 20W RMS Amplifier
* Euroblock speaker output
* Euroblock line input
* Utilizes Bluetooth Specification: CSR 4.0
* Output: 70V/100V/4 Ohms, 20W RMS, Class D design
* Frequency Response: 50 Hz - 23 KHz
* Signal-to-Noise Ratio: 90 dB
* THD: < 0.1%
* Input Impedance: 10 KO
* Maximum Transmission Power: Class 2, 4 dBm
* Transmission Frequency: 2.4 GHz - 2.480 GHz
* Transmission Range: Up to 100 feet / 30.5 meters
* Receiver Sensitivity: -80 dBm @ 0.1% BER
* Supported Profiles: AVCTP 1.0, AVRCP 1.0, GAVDP 1.2, AVDTP 1.0, A2DP 1.2, Hands-Free Profile (HFP) 1.5, Headset Profile (HSP) 1.1
* Supported Codec: SBC, MP3, AAC, aptX

* 1 x 3-pin Euroblock input (R, G, L), up to 16 AWG

* 1 x 4-pin Euroblock output (Common, 4-Ohm, 70 V, 100 V), up to 16 AWG
* 1 x power adapter input

* Power: 15V DC, 2.5 A, center-positive (power adapter included)
* Dimensions (W x D x H)* 6.4-in x 6.0-in x 1.9-in (163 mm x 153 mm x 48 mm)
* Weight: 3.1 lbs.
(1.4 kg)

┬ęThunderball Marketing Inc. Distributors ┬ęDeejayLED LLC Distributors all rights reserved.